E-TRIFIER Bob Beck's ZAPPER with golden plated electrodes

E-TRIFIER Bob Beck's ZAPPER with golden plated electrodes

SKU: E-T C/SST
£75.00Price

E-TRIFIER Bob Beck's ZAPPER with golden plated electrodes

 

Device build on original Bob Beck's schematic diagram according to the protocol.


Set includes/Specification:
- Output 50-100μA (microampere) bi-polar voltage
- Frequency output square wave 4Hz (+-1%)
- Input 9 volt
- Output 27 volt
- 2x Golden Plated electrodes 3mm diameter and 40mm approximately of length
- Wires approximately 50cm lenght, with 2mm banana plugs and 3.5mm jack plug
- 1x band (the color may be different than the one in the picture)
- Adjustable 100k output knob with ON/OFF switch
- 9 volt battery included
- NEW 2x Cotton fabric slip included as a starter kit

- Temperature operation range: 10C to 40C (in Celsius degree units)

- Operating range in air humidity: 20% to 65%


Please read Dr. Bob Beck"s protocol before using this product.


Note: it is required to make two small pockets or wraps from cotton fabric to put in or wrap
the stainless steel electrodes. They can be made using a thin bandage or a thin cotton
cloth. After covering the electrodes with fabric, moisten them with a little salted water.
Place the electrodes in the designated position.


Product have 1 year warranty.

Please read disclaimer on the website before plaicing an order. This non medical device, only for individual research.